Learn to detect the signs of failure that indicate
that your spindle needs to be inspected and repaired.
The spindle is the heart of the CNC machine tool. Indeed, thanks to the latter, it is possible to machine several types of materials and produce parts on a large and small scale. In addition, its robustness and efficiency make it possible to optimize a production line over a very long period. Sometimes ranging from 5 to 10 years. However, the spindle is not immune to mechanical and electrical breakdowns. Various circumstances can lead to its failure. If these issues are not taken into account quickly, the spindle may suffer a general malfunction and cause the CNC machine tool to stop completely.
In order to minimize interruptions and major problems with your equipment, it is important to monitor it regularly.
Unusual noises: Strange or loud noises may occur on the spindle when it is in operation. This phenomenon is most of the time caused by bearings or other damaged parts.
Vibration: a high level of vibration on the spindle, during machining operations, indicates that parts are damaged.
Temperature: A significant rise in spindle temperature indicates a problem with the coolant and lubrication.
Performance: A prominent fluctuation in spindle speed and efficiency indicates a problem with the electrical or control system.
Error messages: an error message and an alarm can be generated by the CNC machine tool. These generally inform that a problem has been detected on the spindle.
Tool holder: a decrease in tool holder retention shows that the spindle cone is deteriorated.
By monitoring your equipment daily, you will be able to have it reconditioned before it is out of service. As a result, you will minimize your production downtime, avoid the decline in your profits and will not have to pay expensive sums for new technologies.
If your spindle has anomalies, call on our repair solution. Our qualified technicians will be able to assess the condition of your spindle and offer you a solution directly related to the problem. Contact us at [email protected].